M-Sat

7:30am- 5pm. OT available

Must be able to pass DISA background and UA. Cannot be afraid of heights.

Both temp and perm jobs available.

Start pay is $17 more if you have experience.

Accounts Receivable & Collections Clerk

Full time position in the Accounts Receivable department.

Essential Functions:

• Handle phone calls and emails from customers and salesmen regarding statements, invoices and past due notices
• Assist in educating customers on available programs and discounts
• Listen to customers story, determine if debt can be collected and make recommendations to management on repayment terms
• Contact customers regarding overdue account, determine reason for non-payment and attempt to collect
• Maintain accurate, professional notes within the existing Company collection notes
• Handle routine clerical duties
• Learn and operate electronic filing system
• Make effective and professional collection calls

Desired Skills & Experience:

• Must have the ability to communicate well with others
• Must be self motivated
• Must be able to work alone AND with others
• Must have good phone communication skills and ability to learn multi-phone system
• Must be able to work more than 40 hours per week, if needed
• Must be able to work with multiple departments
• Must be a high detail oriented person with good organization skills
• Must have understanding of general accounting procedures
• Must have basic math skills

Weld Shop Grinder – 2nd Shift

We offer stable employment utilizing state of the art equipment and clean work facilities. On the job training provided.

Responsible for grinding and sanding welded product. Previous metal work experience a bonus.

Essential Functions:

• Must have the ability to use a hand grinder and sander for extended periods.
• Must be able to stack parts correctly.
• Must be able to keep accurate counts.
• Must check parts to ensure accuracy prior to completion of order.
• Must be able to lift parts of varying weights onto work area.
• Must be constantly alert to potential hazards and keep a safety awareness attitude.

Fabrication General Laborer – 2nd Shift

We offer stable employment utilizing state of the art equipment and clean work facilities. On the job training provided.

Full-time general laborer needed for second shift Fabrication department. Previous metal work experience a bonus.

Essential Functions:

• Must be able to sand and deburr metal parts.
• Must be able to break out parts from large sheets of metal.
• Must have a willingness to learn Fabrication machine operation, as needed.
• Must be able to keep accurate counts.
• Must check parts to ensure accuracy prior to completion of order.
• Must be able to lift parts of varying weights onto work area.
• Must be constantly alert to potential hazards and keep a safety awareness attitude.

Crating – 1st Shift

We offer stable employment utilizing state of the art equipment and clean work facilities. On the job training provided.

Full-time crater needed for first shift.

Essential Functions:

• Must effectively use a variety of hand tools and power tools.
• Must be able to operate lifting devices including overhead hoist, electric parts picker, electric narrow aisle lift, and propane lift truck.
• Responsible for checking parts and wholegoods orders to ensure accuracy and quality prior to completion of order.
• Must be able to assemble parts into a complete subassembly.
• Must be constantly alert to potential hazards and keep a safety awareness attitude.
• Must work well with other people.  Must communicate well with co-workers and other departments.
• Must be able to work in hot or cold conditions, indoors and outdoors.
• Must have some clerical skills; reading part numbers, recording serial numbers, counting inventory, typing labels and entering information into a computer terminal.
• Must be able to assist in loading and unloading trailers and tie or strap loads onto trucks and trailers, as needed.
• May be responsible for the safe transport of finished tractors to the Transportation department from the Assembly Department

Experienced CNC Machine Operator

We offer stable employment utilizing state of the art equipment and clean work facilities. Some on the job training provided but previous experience is a must.

Full-time CNC Machine Operator needed for Machine Shop. Experience operating mills, lathes & NC machinery a must.  Part-time opportunities may also be available.

Essential Functions:

• Must have basic machining knowledge.
• Must have CNC machining knowledge.
• Must be able to read caliper and micrometers
• Responsible for checking parts to ensure accuracy prior to completion of order.
• Must be constantly alert to potential hazards and keep a safety awareness attitude.
• Must be able to lift parts of varying weights into machine.
• Must be able to read and machine parts from blueprints and other instructions.

Full-time position, must be able to work more than 40 hours per week.

CAD Operator

Highly detailed person with good organization skills, self-starting, logical thinker to make CAD models and detail drawings in PRO-E system software.

Essential Functions:

• Route parts through shop floor for part manufacture.
• Create CAD models and detail drawings in CREO CAD system software.
• Must be able to work more than 40 hours per week.
• Must become proficient with Creo from PTC (PRO-E) on Windows 7/10 platform.
• Must have general knowledge of drafting procedures.
• Must have good mechanical aptitude.
• Fabrication experience helpful.
• Must have experience with 3D solid model design software, some training available.

Full-time position, must be able to work more than 40 hours per week.

Machine Shop General Laborer – 1st Shift

We offer stable employment utilizing state of the art equipment and clean work facilities. Some on the job training provided.  Previous experience is a bonus.

Full-time General Laborer for 1st Shift Machine Shop needed. Experience with mills, lathes & NC machinery a bonus.

Full-time position, must be able to work more than 40 hours per week.

Essential Functions:

• Must have the ability to learn to set up and operate a variety of machine shop machines.
• Must count and stack parts correctly prior to next operation.
• Responsible for checking parts to ensure accuracy.
• Must constantly be alert to potential hazards and keep a safety awareness attitude.
• Must be able to lift parts of varying weights.
• Must be able to read and machine parts from blueprints and other instructions.

3rd shift, 11pm-7am

JOB DESCRIPTION

Receive and understand work orders, instructions, blue prints or diagrams for production process to be performed

Use measuring equipment to ensure all quality specifications are met.

Assembles and package products according to diagrams and specifications

Ability to operate any hand and/or power tools

Visually checks work stations to determine if supplies are getting low

Notifies supervisor and/or material handler when supplies are at reorder levels.

Tests and inspects the produced products to ensure they meet all quality specifications.

Report when products are outside of the specifications to proper supervision and/or quality personnel

Job Type: Full-time

Pay: $13.00 per hour

Assembler – 1st Shift

We offer stable employment utilizing state of the art equipment and clean work facilities. On the job training provided.

Full-time assembly worker needed for first shift. Mechanical aptitude and prior assembly experience preferred.

Essential Functions:

• Must have ability to keep pace with a progressive assembly line.
• Must effectively use a variety of hand tools.
• Responsible for checking parts to verify accuracy and quality prior to assembly.
• Must be able to lift parts of varying weights onto work area.
• Must be able to recognize any omitted parts or procedures of assembly process.
• Must be aware of supply of necessary parts required for completion of order.
• Must be constantly alert to potential hazards and keep a safety awareness attitude.

Job Type: Full-time

1st shift/ 6am-4pm/Mon-Thru/$15 an hour

2nd shift/ 4pm-2am /Mon- Thru/$16 an hour

Job Description

Fabrication General Laborer – 2nd Shift

We offer stable employment utilizing state of the art equipment and clean work facilities. On the job training provided.

Full-time general laborer needed for second shift Fabrication department. Previous metal work experience a bonus.

Essential Functions:

• Must be able to sand and deburr metal parts.
• Must be able to break out parts from large sheets of metal.
• Must have a willingness to learn Fabrication machine operation, as needed.
• Must be able to keep accurate counts.
• Must check parts to ensure accuracy prior to completion of order.
• Must be able to lift parts of varying weights onto work area.
• Must be constantly alert to potential hazards and keep a safety awareness attitude.

Job Description

Essential Functions:

• Must have a good knowledge of mechanical equipment and how it operates.
• Must be able to troubleshoot potential problems with equipment.
• Must be able to work with minimal or no supervision.
• Must have some electrical knowledge.
• Must be able to develop and build objects from specs (drawing, sketch or verbal)
• Must have knowledge of fuel safety; job includes working with LP gas, diesel fuel, gasoline, etc.
• Must have general knowledge of hand power tools, drills, saws, etc. as necessary.
• Must be able to learn to operate shop equipment including brake press, laser, welder, etc. as necessary.
• Must be able to operate a forklift.
• Must make safety a priority.
• Must work well with others.

Full-time position, must be able to work more than 40 hours per week.

We offer stable employment utilizing state of the art equipment and clean work facilities. On the job training provided.  Opportunities for advancement within the Fabrication Department.

Full-time CNC Brake operator needed for second shift Fabrication department. Previous metal work experience a must.  Brake Press experience preferred.  Some training available for qualified individuals.

Essential Functions:

• Must have the ability to set up and program multiple bends in material from .050″ to .250″ on a CNC Brake.
• Must be able to set dies, measure clearances and set CNC Brake to required tolerances to produce good parts.
• Must be able to lift parts of varying weights onto work area for the necessary forming or shearing operation.
• Must be able to read and form parts from blueprints and other instruction/planning information.
• Must have the ability to set up and operate a variety of other metal working equipment, including punches, presses, shears, brakes and other CNC controlled equipment.
• Must be able to learn and understand safe operating procedures for all equipment used.
• Must be able to break out parts from large sheets of metal.
• Must be able to keep accurate counts.
• Must check parts to ensure accuracy prior to completion of order.
• Must be constantly alert to potential hazards and keep a safety awareness attitude.

Maintenance Technician I

1^st shift is: 8 am – 4 pm

Pay range: $15 – $20 an hour

At a local Plastic Extrusion Plant in McPherson.

Qualifications: High School Diploma or GED required and 1 year or more building and mechanical equipment and repair experience strongly preferred

Now hiring motivated and punctual Field worker laborers who have experience with Stick Welding.

Must have a valid DL and have a clean background.

Will travel during the week and weekends depending on the job. Pay $20-$25/hr depending on work history and experience.

Apply online: team-employment.com

or

In person: 524 N. Main, Newton

316283-0101

1ST SHIFT ALUMINUM WELDER

Position is located in Sedgwick.

Must have experience and pass a drug screen.

Come in and see us today and we will setup a weld test!

524 N. Main, Newton

316-283-0101

1ST SHIFT FORKLIFT in Newton

Forklift experience required

Must be able to lift up to 50lb

Temp to Hire position pays $15/hr

Come in or call today!

524 N. Main, Newton or 316-283-0101

1st Shift Chemical Tech

Employee will be responsible for setting up machine, operation of machine, must be able to read, write, and understand basic math.

Ability to use spreadsheets, web browsers, and understand basic computer functions. Company will train the right applicant.  Hours are 6am-2:30pm Monday-Friday.

Apply online at: team-employment.com

or

in person: 524 N. Main, Newton 316-283-0101

1st Shift Laborer/Delivery

Delivery of small parts to company in Hesston using a box truck.

Employee will stock assembly lines at the company.

No CDL required but must be able to pass DOT physical.

Apply today online: team-employment.com

or

In person: 524 N. Main, Newton 316-283-0101

1ST & 2ND SHIFT MIG or TIG WELDERS

Positions located in Newton, Hesston, Halstead and Sedgwick!

Must be able to pass a drug screen

Must have on the job experience or completed welding school/courses

Pay depends on weld test $16-$20+/hr

Call our office to setup a weld test or come in today!

524 N. Main, Newton

316-283-0101

1ST or 2ND SHIFT PAINTERS and PAINT HELPERS

Painters must have experience and Paint Helpers must be able to lift up to 50 pounds.

Must be able to pass a drug screen and background screening.

Apply today!

524 N. Main

Newton, KS

316-283-0101

General Laborer located in Newton

Must be able to lift up to 50 lbs continuously

Must have a clean background and be able to pass a drug screen

Temp to Hire position with excellent benefits when hired onto company.

1st Shift–8am-4pm Mon-Fri

2nd Shift–4pm-Midnight

3rd Shift–Midnight-8am

Come in and see us today!

524 N. Main, Newton

1ST & 2ND SHIFT ASSEMBLERS

Must be able to read blueprints and pass assembly test in our office. Up to 1 year experience as an assembler preferred but not required.

Must be able to pass a drug screen and pass a background screening.

1st Shift–6am-2:30pm Mon-Fri, some assembly lines may vary in shift times $15/hr

2nd Shift–3:30pm-Mid, some assembly lines may vary in shift times $16/hr

Come in and see us today!

524 N. Main, Newton

316-283-0101

Monday- Saturday

9am- 4pm

Local Salina Hotel

$10.50/hour